discussions

guidelines

meet the moderators

Refine Display
Discussion Categories
garage door openers topics
Start a

LockedGarage door opener does not open door.

posted on January 27, 2010 at 08:35PM Inappropriate?

My garage door opener does not open the door one of my two garage doors. You hear a clicking noise when using the remote or button on wall. I notice the light on the garage door opener was blinking (next to the red button on it) I have another garage door opener and the light is steady. So I have not found out the reason this is happening. At one point the garage door opener did work but not now.(at least not for a week or two) HELP!!!

replies: 7 latest post: June 11, 2010 at 03:26PM by StingrayAxe
Displaying all 7 posts
posted on January 28, 2010 at 07:03AM
 

Hi krems1!  You may want to try the Craftsman Garage Door hotline.  They are very helpful, and there are lots of troubleshooting tips, available.  You will want your model number handy before you call.

1-800-528-5236

posted on March 17, 2010 at 02:21PM
 

i bought  a new remote and it dos'nt work thr garage door opener--it's an old opener---do you make a remote that will work

posted on March 17, 2010 at 03:32PM
 

Krems1,  The blinking LED is giving you a code.  Count the number of blinks and refer to the diagnostic section in your owners manual.  If you don't have your owners manual then you can get one at manage my home.com.  This will get you started.  Reply once you find out and we'll go from there.

posted on March 17, 2010 at 03:35PM
 

prestonnewton,  Sears makes remotes for GDO's that go back to 1979.  Call Sears parts direct with the model number of your GDO and they will be able to sell you the right one. 

posted on June 09, 2010 at 12:53PM
 

had a storm lastnight now are garage door wont open with the remots. can u help

 

posted on June 09, 2010 at 10:08PM
 

have garage door opener that had a broken chain drive sprocket. it was takin down and unwired.need a wiring diagram. have 2 black and white and 1 red and white. Also have new sending and recieving eyes but dont say for sears craftsman. will thay work?

posted on June 11, 2010 at 03:26PM
 

TheEd,  No, you will need the correct sensors for the model opener that you have.  Those are the black and white wires.  Get your model number and order the right sensors from Sears Partsdirect.  Then take a look at your owners manual on Sears Managemyhome.com.  You will find the wiring directions in the manual.

LockedThis topic has been locked.