selected
unselect
Craftsman C3 19.2 volt 7-1/4 in. Circular Saw with Laser
Cordless tools are great, wonderful etc. until you have to replace the batteries. Replacement batteries can be very expensive. Almost half the cost of the tool itself. I learned this fact after I had to replace the lithium batteries for my cordless drill.
Craftsman 10 in. Buffer/Polisher
I HAVE THE OLDER MODEL 10" BUFFER. I LIKE THE LONGER CORD RATHER THAN THE PIG TAIL. MY ONLY PROBLEM IS THAT WHEN TRYING TO FINE REPLACEMENT PADS, THEY DONOT EXIST. SEARS USED TO STOCK THEM, BUT NOT ANYMORE. AFTER NUMEROUS CALLS TO SEARS HEADQUARTERS I FINELLY WAS CONNECTED WITH A KNOWLEGEABLE PERSON. THE PADS HAVE TO NOW BE ORDERED FROM SM ARNOLD, WHO MAKES THEM FOR SEARS. SEARS IS NOT STOCKING THE 10".....BUT STILL SELLING THE 10" BUFFER???? THE NEW PADS FIT A 9"AND 10", HOWEVER IT'S A BATTLE TO GET IT ON A 10".
Craftsman 9.6V Cordless Drill w/24 Accessories, Battery, Charger and Case
I purchased this after my main drill (Professional DeWalt) was stolen and I didnt use it enough to justify the replacement cost... but unfortunately I think I went a little too low with this drill.
If you want to do basic drilling and placement os screws I think you'll be fine with this... I needed to do some hole-drilling (with hole-drill bits) and it completely fails at that that. Fails to the point that I think I'll need to buy another drill to do the job. :/
Bottom line - this is a great all-around-the-home drill for doing basic chores and whatnot... but if you ever get outside that realm at...
review »Craftsman Professional 12.5 amp 2-1/4 hp Fixed Base Router with Soft Start and LED Worklights
I have been using this router for over a year. I have used it with huge router bits to cut raised panel doors and it gets the job done. I am only back on the site because I am trying to find replacement parts for it (such as a 1/2" collet and an extra router wrench). Which would be a bad thing about this item. Is that I cant find these items. I would also like to buy a plunge base for this router by itself but cant seem to find one. These items should be more available.
Craftsman 19.2V C3 Compact Lithium-Ion Drill / Driver
I first saw this drill at a friends house; could not believe how much power it had;;it twisted my wrist once when using it; I just have not been accostomed to REAL power in a drill. It charges quick iin 45 minutes; and the lights let you know when it is getting weak, so usually a 20 minute recharge has me ready for the next task. It does not hurt Lithium batteries to NOt be fully discharged before you charge them again.....I am very impressed
Craftsman 2 hp Soft Start Fixed and Plunge Base Router w/Electronic Feedback, 11 amp
I purchased this set when I was looking for a router with a bit more "oomph" than the 1 1/2HP Dewalt DW-610 I had in my router table. I really like routers with rack and pinion depth adjustments vs. rotating collars, so this model won out. Getting a plunge base as part of the package was icing on the cake. The supplied case holds the motor, both bases, chuck wrench, and the supplied edge guide.
I haven't mounted the router in the table yet, but I have used it for a furniture building project as a handheld unit. The soft start feature gives the operator much more control as the motor doesn't...
review »
Craftsman 19.2V C3 Impact Wrench Add-On
i am very very impressed with this new unit..i have 5 other C3 tools and have been waiting for a stronger impact than the 1/4" one that has been out. today i brought it to the junkyard , removed 2 wheels with it then took the huge strut bolts out and the a arm bolts out on a mustang. those of you that have done this know they require alot of power. this was all done on a Lithium battery witch i might consider a must with this 1/2" gun
buy and you will no regret! it is about time!
Craftsman C3 19.2 volt Cordless Combo Kit with RA Drill
I use these drills in remodelling my large kitchen. They are great for heavy work as well as light. I like them so much I bought an additional set plus extra batteries since I use them all day and I don't have to change bits. The price is right & the quality is there. The cordless drills are especially convenient for putting down backerboard & installing my kitchen cabinets. Since one drill has a variable torque and the other is a right angle drill they are always ready to go. I am a 69 year old woman. I have many Craftsman power and hand tools. I am even teaching my husband how to use them....
review »
Craftsman C3 19.2 volt DRILL/DRIVER
Bought this drill to replace my six year old craftman 16.8 volt drill. The drill fits in the hand comfortably and the chuck angles works well for hard to set screws. The 1/2 chuck is nice but I seldom use a bit larger than 3/8. The batteries charge quick and last a couple of full days before needing recharge. I like the bubble level on the back of the drill for drilling perpendicular. I would recommend this drill because the price is right, the drill works like it should, and it comes with two batteries and a quick charger.
Craftsman C3 19.2 volt DieHard Cordless Drill/Driver with LED Light
I have used this drill for at least 3 years and find it outstanding. It's great for what I use it for, which is projects around the house. The price is very reasonable. I like having two batteries so that I can always complete the job and the flashlight is nice too, although I really haven't needed it. I'm buying another one as a Christmas present for my son.
Craftsman 19.2 volt Personal Fan
Craftsman NEXTEC 12 Volt Lithium-Ion Hammerhead Auto Hammer
This is a great invention. It is portable and compact and easy to use. With that said it does have some negatives. I am a professional roofer, it comes in very handy in tight spaces like under soffits over hangs valleys and chimneys. It works great on firm solid surfaces such as one byes, two byes and half inch or thicker OSB. It does not however work as well on half inch or thinner plywood. It does seem a little weak at times and you really have to put a lot of pressure behind it. I like the quick charge time and the batteries seem to have fairly good run time.
Craftsman Nextec Hammerhead Auto Nailer
I ordered the Craftsman Nextec Hammerhead Auto Nailer, because it always seems that I can not get my large or small hammer into tight spaces without being a huge chore. The auto hammer can be a bit awkward when you have to hold the nail for the first hit, but, once the nail is started, it works very well.
Portable Power Tool Reviews
| Need Some Help | kledbetter2009 | 1 hour, 42 minutes ago |
| What is your must-have power tool? | Jolie | 5 hours, 47 minutes ago |
| the new NEXTEC MULTI-TOOL | SKYDADDY29 | 12 hours, 55 minutes ago |
| cordless impact driver | danny97 | November 20, 2009 at 11:12AM |
| Must have power tool? Just one? | Satchmo | November 16, 2009 at 04:46PM |
