Looking to buy new drill

Paging Adamo. Adamo youre need in the tool-ward immediately we have a tool related emergency

If your doing small jobs then Sears drills are ok. Buy one with TWO batteries. The problem I have found with Sears drills is the chucks holding the bit. Over time they hold poorly. I have two Sears driull and both have a chuck problem.

I have found Sears tools have gone down hill over the pass 20 years. I use to buy alot of tools at their store but no more...I feel I can no longer trust Sears.

Sears tools are great for the home or small projects. You need to read the directions and understand your tools. The chuck can be tightened on the drills (if you read the directions), so that shouldn't be an issue. Understand your batteries- whether it be Ni-Cad or the Lithium Ion. Each has its limitations and the directions explain how to store your batteries if not in use for prolonged periods of time. The C3 tools are convenient and well priced. I have 9 tools, 2 lithium-ion batteries, and 2 Ni-Cad batteries. I had a Dewalt set before this, and I'm much happier with the C3 line. Dewalt worked great, but the convenience of the C3 line and what you can add to it blows everything else away.

Before you throw away good money,when buying any power tool,invest in GOOD tools.Makita makes the BEST.I have 4 Craftsman drills,ranging in size from 14.4 (1) -up to 19.2 (2) with a worthless obsolete 16.? (1) I have a collection of dead batteries,most dying within days of warranty expiration. The Makita that I bought back in the 1970 when  CORDLESS had just started,is still working-GOOD....It is, however NOT VSR, just two speeds and 9.2 v. and it still will stand up to Craftsman's 19.2 v.Spend wisely and good luck...........

The latest Craftsman 19.2 volt C3 Drill/Driver is a good way to go.

The tools go on sale all the time, and there are currently around 27 accessory tools you can buy that will make use of the Drill/Driver's batteries and charger.

DeWalt and Makita's are trademan's (person's) tools, that are priced accordingly.

And, that would be a 16.8 volt battery.

Sears is like the rest off the big businesses, screw the workers of this country. You have to work two jobs plus your spouse must work to raise a family. What happened? One overriding fact, lack of Unions, they have been on a downhill course since Reagan fired the Patco Air Controller's and Republican's have weakened them further with right to work (for less) laws. Wake up America and unionize, build up the middle class again and take back our country from the American Aristocracy.

I recommend the Craftmsan C3 19.2v Drill/Driver. it's priced really well and on top of it, the 19.2v Diehard battery can power a large varitey of other tools.

that way if you need a drill now, you have one, and if you need a circ/recip/jig saw later you're already half way there! . 

I purchased a C3 4pc combo for almost everyone in my family last Christmas and it seems like every week they are coming up with new ideas/things to fix or make from scratch.

the C3 is my recommendation (especially for how you're looking to use it), but definitely continue to do your research so you can find the perfect fit for you!! 

I understand from a TV news report that the average experience of Aircraft Controllers is about 4 years.

The motto is, "Don't obsolete people, until you have their replacements "ready".

LOL!

Lately, the average AGE of aircraft controllers is about 4 years. ;)

But, he sounded very mature - for his age...

Umm I would go with a 14.4volt drill/driver or hammer drill. Or the new 12volt lithium Ion. Ni-Cad batteries last for about 18months as by Milwaukee's warranty on their batteries.  I would never go 19.2 volt unless you have extremely strong forearms.  I am not bias because i don't work for sears but i work for Northern Tool & equip we numerous commercial grade tools.  If you go to northerntool.com we have free-shipping on power tools right now too

A good Brand would be Home depots line called Rigid they have TONS of torque if not more that Dewalt

I'd only buy their hand tools and none of their power tools

Well.

There are a whole-lot of them 19.2 volt Drill/Drivers being sold, along with some of the 27 possible accessories, that use the same battery.

Some people must be happy with their new tools.

Not, too many of them get returned within the first 90 days or 3 year, if the Sears Protection Plan for the electric tools is purchased.

How do I tighten the chuck on my craftsman drill ?   I always have trouble with the bits slipping. I think the chucks are junk.

Rather than using the drill's motion to tighten against the grip of your free hand (which can cause injury and doesn't do a very good job), I recommend just doing it manually. Turn the chuck and the collar in opposite directions as hard as you can, and the chuck's jaws should bite down plenty hard to keep the bit still.

You may have gotten a drill already by now, but if you haven't I would recommend the Craftsman 20v 1/2"drill.I have used other cordless drills & have a Craftsman corded drill that I've had for over 40 years.About a year ago I went into my local Sears store just to look around because I was in the area & I saw the 20v cordless.I wasn't in the market for a new drill,but as I walked past a display with a working model I picked it up & fiddled with it & really liked it.I went home & thought about it. I decided I really wanted it so I went back & bought it.As I used it I really liked it.The batteries really last a long time in use & recharge quickly just like they say.It has loads of power & needs the front handle that comes with it on really tough jobs so you can control it.When I bought mine it cost $289.99. I was at Sears a few days ago & saw it was selling for $199.99.I don't feel bad about it because it was well worth it since I have had the use of it for the year+.

That model is part of the Craftsman Professional power tool line.

It has a higher price-point than the more DIY oriented 19.2 volt C3 drills.

But, as the other poster stated, it is a very capable tool.

Do not buy a cordless Sears Power tool especially 14.4volt this is the most dis-appointing tool I ever bought at Sears it is not reliable doesnt hold a charge for more than a few minutes(came with 2 batteries)spend a little more and buy a different brand,Lithium power is better.-------Moses--Good Luck

What wasn't mentioned is that the 14.4 volt size tool was superceded by the 15.6, 18, and now 19.2 volt tool some years ago.

And, if Nickel-Cadmium batteries are not your cup of tea (memory and a charging/discharge regime is required) then Lithium-Ion battery powered tools may be JUST what you "need".

And, if things are REALLY challenging, the corded tools still work real-good, where there's an outlet handy.

The new Croded tools even have little green lights in their handles to confirm you're having power to the tool!

Simple. But, clever!

My God Lisa B you are attractive. A woman with power tools, I am in love. Now on to the question. I prefer Makita, pricey, but will last a lifetime for the typical homeowner. Try the new Lithium LXT; great tools and outstanding battery shelf life.  Remember...you buy cheap...you buy twice.