Outdoor Tools & Supplies Discussion Board

craftsman chain saw

mikerbr549 — Mon, 22 Nov 2010 01:32:39 GMT

My saw would run for a while then shut down for no reason. Or I would shut it off and it would'nt start untill it cooled off. I'm pretty handy so I tore it apart (after changing the plug 6 times) On just a guess, I changed the eletronic module that set next to the fly wheel. I think it was $35. It runs better than it ever did! That was 4 years ago ! still running strong! When this one burns up I'll get a good one, probably one like the fellow in previous post. But the way it looks now it will be several years. It takes a lot of TLC to keep it going, I have to tear down the bar and clean the chain groove after every trip to the woods to keep it working (oiling) properly, but I do that myself and doesn't cost anything. For $125 I cannot complain!

Need nozzle for c3 blower

BlueCrewGuyInMA — Thu, 14 Oct 2010 02:26:17 GMT

searspartsdirect.com

And, next time, don't do that. :)

Need nozzle for c3 blower

Luckee1 — Wed, 13 Oct 2010 23:38:34 GMT

What a dope...I just bought a new Craftsman leaf blower (19.2 volt) and inadverdently threw out the nozzle that was in the box!

How can I just get a new nozzle without having to buy a whole new blower? Thanks!

Dummy

craftsman folding knife

GardenTractorMan — Fri, 08 Oct 2010 15:24:50 GMT

Personally I don't carry a knife but I saw a new folding knife in the Sears holiday tool catalog. I am not sure if it is a Craftsman but it is worth a look.

craftsman folding knife

BlueCrewGuyInMA — Thu, 07 Oct 2010 15:34:30 GMT

If you call 877 4BLUCRW (425 8279) they may be able to assist you with your knife.

craftsman chain saw

inquisitivemind — Thu, 07 Oct 2010 09:06:51 GMT

That is the classic symptom of failed crankshaft seals.

craftsman folding knife

toolboxhero — Thu, 07 Oct 2010 04:08:07 GMT

Put it in your tool drawer. Wait 20 years and sell it as a Classic Craftsman Antigue!

craftsman chain saw

loupugliese — Thu, 07 Oct 2010 04:01:56 GMT

I had a craftsman chain saw 16" as a gift. I used it a few times but ended up giving it away and bought a husqvarna no problems with the second one. The craftsmen was nothing but problems. The guy I gave it to got it running but only at high speeds with chain turning

craftsman folding knife

loupugliese — Thu, 07 Oct 2010 03:56:44 GMT

I have a craftsman foldinf knife whose tip broke off. I am told that they are no longer carried. How or what do I get for a replacement that lifetime warranty thing

Craftsman Line Trimmer

ds3325 — Tue, 21 Sep 2010 18:31:29 GMT

Go on searspartsdirect.com and enter 172.74545 as the model number and all the parts for your trimmer will come up. If you like you can call my Sears Hometown Store in Greenwood, SC at 864-223-4266 and I'll help you order what you need.

Help-need replacement pole for Weedeater

ds3325 — Tue, 21 Sep 2010 18:28:14 GMT

Go to searspartsdirect.com and enter BC250 as the model number. You can order the part from there or you can call Sears in Greenwood, SC and I can order it for you over the phone.

Craftsman Line Trimmer

JazzzzyLady — Fri, 10 Sep 2010 19:45:10 GMT

Okay, Sears... have tried unsuccessfully to find supplies for a Craftsman Electric Line Trimmer, Model Number 172.745450. Is this the same as model 172.74745? Please advise.

gas trimmer 358.795150

cupboy — Thu, 26 Aug 2010 18:38:12 GMT

What's meant by hassle free?

craftsman chain saw. 36cc 2 cycle

Phil3 — Thu, 26 Aug 2010 02:53:31 GMT

I have a craftsman chain saw 2 years old, I beleive a 42 cc 18" bar only used it for a total of about 4 hours in the two years and was cutting with it this weekend and it locked up tight, the engine is blown. I had fresh gas and was using craftsman synthetic oil, shook the gas can before putting the gas in the saw. Don't know what I am going to do yet I just thought I can't find the receipt yet to see if I had the extended warrenty. I just thought I would mention it because two saws same age close to the same problem.

Help-need replacement pole for Weedeater

dawn8459 — Fri, 20 Aug 2010 17:11:36 GMT

Hi, Can anyone help me?

Does anyone know if and where (if so) I can buy the main pole part for a Redmax weedeater BC250? Don't know how, but he broke his and he needs it asap.

Thanks and God bless

craftsman chain saw

bullsnake — Fri, 20 Aug 2010 13:16:10 GMT

i have a craftsman 20" 55cc chainsaw brand new still in box. I can not find the 55cc listed is it still being made. Approx value if anyone knows. Thank you.

gas trimmer 358.795150

madgolfer — Tue, 10 Aug 2010 23:19:50 GMT

Could be the spark arrestor screen in the muffler is covered with carbon. Check out the Youtube video on Weedwacker repair.

gas trimmer 358.795150

nbeliso — Tue, 10 Aug 2010 23:14:33 GMT

gas line trimmer starts but as soon as i tried to start using it will stop running. what do you think is wrong?

gas trimmer 358.795150

nbeliso — Tue, 10 Aug 2010 23:14:31 GMT

gas line trimmer starts but as soon as i tried to start using it will stop running. what do you think is wrong?

gas trimmer 358.795150

nbeliso — Tue, 10 Aug 2010 23:14:26 GMT

gas line trimmer starts but as soon as i tried to start using it will stop running. what do you think is wrong?