Reviews about Table Saws

LuKaii says "great workhorse" about Ryobi 10 in. Compound Miter Saw

LuKaii — Thu, 29 Dec 2011 03:53:21 GMT

bought this when we were installing a hardwood floor. easy to use, plenty of features, and it cuts like a champ. wish the extensions were a bit longer/sturdier.

...

dmoody19 says "this saw was a huge disappointment, lasted less than 6 hours run" about Craftsman 10 in. Table Saw

dmoody19 — Sun, 19 Dec 2010 02:33:27 GMT

Bought this saw a few months ago and finally got to use it a couple of weeks ago at my home. I had 7 cedar boards to cut and by time I got to the 7th the saw died on me. This is two saws in 2 weeks. Both are supposed to be professional quality with this one being "contractor " grade. What a huge disappointment.... Make sure you buy extended warrantys folks. You are going to need it...

...

shawn5581 says "Awsome Table Saw" about Craftsman 10 in. Table Saw

shawn5581 — Thu, 22 Jul 2010 20:00:59 GMT

Great Saw! Runs quiet and strong.Only problem is it will not hold zero. I looked inside and beleive the guide rod is not poperly installed as its bushing moves back and forth rather than being screwed to the cabinet as the floor model.Good thing I got the in home repair.The fence is ok but seems to be off a 1/4 inch when making wide rips.No big deal i always measure against it anyway.For the money spent and the perfomance its a no brainer.

...

DedrickWelch says "Great tool, simple to use." about Ryobi 10 in. Compound Miter Saw

DedrickWelch — Sat, 08 May 2010 12:37:46 GMT

I bought this tool to assist with installing hardwood floors in my home. I came to use it for so much more on everday projects.

It is an excellent tool.

...

sirvey says "I've gained some industrial capabilities with this saw." about Craftsman Table Saw 152.221240

sirvey — Sun, 28 Mar 2010 19:06:37 GMT

I purchased this saw a little over a year ago based on reviews and shopping comparison as one was not available in store to look at. It's a heavy weighted article for home use, a good value for the price when you consider this device put you at the threshold of industrial capability. This came with the Bieseymer fence system which I find highly accurate there is a belt drive which I think is an attribute and it's the first home shop table saw that I've owned where the blade guard acctually lines up with the blade. There is a metal table support you attach to the rear of the saw to assist you in balancing larger sheets. You can operate the saw off of 120 or 220 volts. I did notice however as I read in other reviews that the blade seems to slow down in certain cuts like harder woods. I would say to make sure your blade is sharp at all times and that will help overcome some of that. It is possible that if you ran the saw on a 220 line instead of 120 there would be a difference in operation...

...

SunnyB13 says "great table saw" about Craftsman 10 in. Table Saw

SunnyB13 — Sun, 21 Mar 2010 15:47:31 GMT

This table saw was just the right size and does a perfect job every time it is used.

...

lisap21 says "Craftsman Table Saw takes a beating!" about Craftsman Table Saw 152.221240

lisap21 — Fri, 12 Mar 2010 15:43:25 GMT

I am a contractor and have owned the craftsman table saw for years. This is my second craftsman table saw. This saw is very portable, and lightweight. The cuts are great and the fence is very sturdy for the price.

...

seanch39 says "I have been well impressed with this table saw's durability" about Craftsman Table Saw 152.221240

seanch39 — Tue, 09 Mar 2010 14:35:40 GMT

I am a professional trim capenter and have owned and used many different brands of tools.This table saw has seen a lot of hard usage and never has failed me in the field.

...

chadbebout says "Good Stuff" about Craftsman Professional 10 inch Portable Table Saw item # 00921829000

chadbebout — Mon, 08 Mar 2010 23:14:56 GMT

Wouldn't recomment it for cabinet duty but a step above the standard model with much more power.

...

Barbie1168 says "THE CRAFTSMAN TABLE SAW IS THE BUY OF THE YEAR" about Craftsman Table Saw 152.221240

Barbie1168 — Wed, 24 Feb 2010 15:54:35 GMT

I bought the Craftsman Table Saw on sale and WHAT A SALE! Great buy and it works fantastic. The satns and saw was $109.00. You cannot buy this quality and durability for that price any where else. We love it and use it all the time. It will last years and years. Handy and not cumbersome to move. Easy to take care of too. Wouldn't do with out it.

...

hallab says "Great for novice to intermediate" about Craftsman 10 in. Table Saw

hallab — Fri, 12 Feb 2010 02:36:45 GMT

This is a well built easy to use table saw with professional results. I highly recommend it to all beginning and intermediate craftsman.

...

barbwirepete says "The Craftsman 10" contractors table saw is a high quality item." about craftsman 10" contractors table saw

barbwirepete — Tue, 02 Feb 2010 17:02:44 GMT

The saw is of very good quality and can do many things. The only problem was with the instruction manual as it was not accurate in places. Written instructions grade C, pictures D-. The saw itself I would grade it as an A.

...

intlpvti says "Non Standard Miter Slot" about Craftsman 10 in. Table Saw with Dust Collection System

intlpvti — Mon, 07 Dec 2009 02:28:34 GMT

...

johnbrey47 says "Great saw for around the house." about Craftsman Professional 10 in. Jobsite Saw

johnbrey47 — Tue, 01 Dec 2009 22:41:37 GMT

Great saw for around the house. I have had several table saws thru the years. This saw is portable. It stores easily in my garage, between the cars. I can move it out and be set up to cut in just minutes. I recently put a Dado blade on the arbor and was pleased that there was plenty of power to make the cuts. Unless your a cabinet maker... this is the saw for you. By the way, it cuts true, unlike several other saws that I have owned in the past...

...

mattersnot says "WORTH EVERY PENNY" about Delta 10 in. 13 amp Portable Table Saw

mattersnot — Fri, 28 Aug 2009 11:34:40 GMT

I paid $150.00 for my Delta K9408. ( K9804?),Very portable. I did change the legs to a heartier " wood-vice stand", that was sold same 15 years ago, and was a popular job site vice/bench product.. because when ripping 2X6's and 4X4"s, the saw would nudge forward. Very stable now.

Anyway, I use it daily and use it hard. No mercy, it cuts very, very accurate. You have to get to know your saw's quips. These are portables. The fence locks hard, no slippage. The blade guard is a bit flimsy. But I do not use guards on any saws I have. The miter does go to 45'. With a little nudge.

Overall, I am real happy with this saw. After 6 years, it cuts like new. Motor has not slowed down a bit.

If one buys $80.00 VS. $140.00, well there is a difference. Spend the 140.

For an absolute pro saw, for some $300.00, Black&Decker has a portable that works like a $1,500 table saw. I have one in the shop. Portable, yes. But I leave it put.

...