http://www.mysears.com/Nails-Staples-Pins Tue, 08 Nov 2011 16:38:57 GMT Reviews about Nails, Staples & Pins http://www.mysears.com/Craftsman-3-4-in-Finish-Nails-16-ga-Box-of-1000-review-154a3 <p>searched for  3/4" ,16 gauge  nails for my nail gun, which happens to be a craftsman, but went to OSH first &amp; they carry craftsman but not what i needed, then to home depot and again no 3/4" nails. Went to sears and there they were. They worked great and got the job done!</p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>... Tue, 08 Nov 2011 16:38:57 GMT http://www.mysears.com/Craftsman-3-4-in-Finish-Nails-16-ga-Box-of-1000-review-154a3 paintstar 5 http://www.mysears.com/Craftsman-2-in-Brad-Nails-18-ga-Box-of-1000-review-a2ee8 <p>I got a couple sets of these brad nails for use with the Craftsman Evolv 3 Gallon Pancake Air Compressor and Braid Nailer combo.  It's the longest, heaviest brad this particular nailer will take and I didn't have any jams or misfires in the 500+ I've used so far.  They work well fastening quarter round, scribe molding, and I even used them to fasten some prehung interior doors.  No complaints yet!</p>... Thu, 22 Sep 2011 14:59:19 GMT http://www.mysears.com/Craftsman-2-in-Brad-Nails-18-ga-Box-of-1000-review-a2ee8 t00lz 5 http://www.mysears.com/Craftsman-1-1-2-in-Brad-Nails-18-ga-Box-of-1000-review-1d4a5 <p>fits nail gun,</p>... Thu, 01 Sep 2011 16:02:12 GMT http://www.mysears.com/Craftsman-1-1-2-in-Brad-Nails-18-ga-Box-of-1000-review-1d4a5 xxzz 5 http://www.mysears.com/Craftsman-2-in-Brad-Nails-18-ga-Box-of-1000-review-aaff1 I have been looking for 1-1/2" length Brad nails for my Dewalt D51328 brad nailer. The nails fits my Dewalt nailer just fine. Drove about 10 nails into test pieces of scrap treated cell-cure wood. Would recommend to a friend looking for 1-1/2" length Brad nails.... Thu, 25 Aug 2011 20:22:01 GMT http://www.mysears.com/Craftsman-2-in-Brad-Nails-18-ga-Box-of-1000-review-aaff1 bluesky929 5 http://www.mysears.com/Craftsman-2-in-Brad-Nails-18-ga-Box-of-1000-review-344b6 What can you say about nails? They are just as advertised and no jams in the 30~40 I've used so far.... Sun, 14 Aug 2011 21:06:56 GMT http://www.mysears.com/Craftsman-2-in-Brad-Nails-18-ga-Box-of-1000-review-344b6 Wes1790 5 http://www.mysears.com/Craftsman-1-1-4-in-Brad-Nails-18-ga-Box-of-1000-review-58db1 <p>I purposely went to Sears Hardware to purchase brad nails for our Craftsman brad nailer. I returned home to find out they did not fit our Craftsman. I then had to make a trip back to the store to find out why they did not fit. The man in the store who was the expert in this dept. came to the front counter to find out why they did not fit. He verified the brads were the correct ones for our Craftsman but they did not fit because they were too long. He said they were made in China and their measuring system is different than ours. So again China made something for the USA that did not fit the USA product. When will we learn not to have products made in China. Don't buy brads from Sears as they will not fit a Craftsman brad nailer. </p>... Fri, 03 Jun 2011 18:58:54 GMT http://www.mysears.com/Craftsman-1-1-4-in-Brad-Nails-18-ga-Box-of-1000-review-58db1 handymanD 1 http://www.mysears.com/Craftsman-1-1-2-in-Brad-Nails-18-ga-Box-of-1000-review-fa6d4 <p>These brads do exactly what they are supposed to, they go into wood. I have not had any jams or bent brads using these.</p>... Mon, 04 Apr 2011 02:11:50 GMT http://www.mysears.com/Craftsman-1-1-2-in-Brad-Nails-18-ga-Box-of-1000-review-fa6d4 manitou92 5 http://www.mysears.com/Craftsman-3-1-2-in-Framing-Nails-Full-Head-Box-of-1000-review-f9f06 I ordered a box of nails. They were not cheaper than a local home store but I wanted Craftsman. They came very timely which was great, but then I wanted to send my wife to pick them up. After literally 6 phone calls to various people I was told in order to have someone else pick them up I should have indicated that initially and I was out of luck. There was alsolutely nothing that be done. I felt like I was buying a kidney not a box of nails. I found that absolutely ridiculous. Anyway, my wife went to try and get them and it was no problem due to a reasonable counter person at the store. In summary, I found the inflexibility and inavailibiliy of Sears personnel on the phone to be such as hassle and ridiculous that I will buy the next box at **********. In addition, I have just been trying to post this and the website appears to be as tedious as the phone service!... Fri, 28 Jan 2011 04:17:36 GMT http://www.mysears.com/Craftsman-3-1-2-in-Framing-Nails-Full-Head-Box-of-1000-review-f9f06 bgling 3 http://www.mysears.com/Craftsman-1-4-in-Crown-Staples-18-ga-1-in-Long-Box-of-1000-review-06cf2 <p>Great staple, no jams in my air gun,</p>... Thu, 07 Oct 2010 17:59:31 GMT http://www.mysears.com/Craftsman-1-4-in-Crown-Staples-18-ga-1-in-Long-Box-of-1000-review-06cf2 robohh 5 http://www.mysears.com/Craftsman-3-1-2-in-Framing-Nails-Full-Head-Box-of-1000-review-a63f1 <p>I purchased a Craftsman Framing Nailer to work on my fencing project.  Unfortunately, keeping this nailer supplied with nails became a challenge at the time I was starting my project.  None of the local stores had any in stock of the right type (correct angle, length, nail head, coating, etc.).  I ended up finally finding these nails online at Sears but couldn't get them at a store.   Apparently, there is a bit of a "nail war"  shortage going on out there because of import issues, but I won't digress.  It came down to using these nails with the plastic retaining strap.  I've actually purchased a few boxes of nails all of different lengths.</p> <p>I really had to crank up the pressure and striking strength on the nailer to get these nails to be fully seated.  I was applying these to either 2x4s or 4x4s (Pressure Treated) and couldn't always get them in but that was more a problem with the wood and the nailer and not the nails, I assume.</p> <p>Many times a bit of the plastic strap would end up...</p>... Mon, 17 Aug 2009 11:55:34 GMT http://www.mysears.com/Craftsman-3-1-2-in-Framing-Nails-Full-Head-Box-of-1000-review-a63f1 yardNgard 3 http://www.mysears.com/Craftsman-2-1-2-in-Full-Head-Galvanized-Framing-Nails-review-91c62 <p>I purchased a Craftsman Framing Nailer to work on my fencing project.  Unfortunately, keeping this nailer supplied with nails became a challenge at the time I was starting my project.  None of the local stores had any in stock of the right type (correct angle, length, nail head, coating, etc.).  I ended up finally finding these nails online at Sears but couldn't get them at a store.   Apparently, there is a bit of a "nail war"  shortage going on out there because of import issues, but I won't digress.  It came down to using these nails with the plastic retaining strap.  I've actually purchased a few boxes of nails all of different lengths.</p> <p>I found my Craftsman Nailer isn't always so fond of these little gems.  Sometimes, but not always, the plastic would jam up in the nailer shoot / guide.  The hammer would jam or end up sliding past the nail and just impacting the wood.  I would make sure the nail gun had a few drops of lubricant every time I would start up so I'm pretty sure...</p>... Mon, 17 Aug 2009 11:55:34 GMT http://www.mysears.com/Craftsman-2-1-2-in-Full-Head-Galvanized-Framing-Nails-review-91c62 yardNgard 3 http://www.mysears.com/Craftsman-1-1-2-in-Finish-Nails-15-ga-Box-of-1000-review-f97e The only thing I don't like about the nail gun is that you have to use craftsman nails. I tried to use other angled nails and it just didn't work out to well. Also, the little horizontal pin that the access door pivots on broke and I had to put a cold rolled pin in there. Other than that it works fine.... Tue, 21 Jul 2009 05:45:07 GMT http://www.mysears.com/Craftsman-1-1-2-in-Finish-Nails-15-ga-Box-of-1000-review-f97e sears-feed 3 http://www.mysears.com/Craftsman-3-1-2-in-Framing-Nails-Galvanized-Box-of-1000-review-b0bf ... Wed, 29 Apr 2009 12:15:18 GMT http://www.mysears.com/Craftsman-3-1-2-in-Framing-Nails-Galvanized-Box-of-1000-review-b0bf sears-feed 5 http://www.mysears.com/Craftsman-3-in-Framing-Nails-Clipped-Head-Box-of-2000-review-0531 ... Wed, 29 Apr 2009 12:15:18 GMT http://www.mysears.com/Craftsman-3-in-Framing-Nails-Clipped-Head-Box-of-2000-review-0531 sears-feed 5 http://www.mysears.com/Craftsman-1-in-Brad-Nails-18-ga-Box-of-5000-review-40b5 These brads fit the C3 Nailer perfectly. That fact should be advertised with the Nailer Stapler. Earle... Thu, 08 Jan 2009 12:45:09 GMT http://www.mysears.com/Craftsman-1-in-Brad-Nails-18-ga-Box-of-5000-review-40b5 sears-feed 5