Latest reviews about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

jeremy1988 says "Works Well And Are Able to Use An Imapact" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

jeremy1988 — Thu, 29 Dec 2011 19:36:41 GMT

Works Well, Must have in every tool box. No Cons Does What you Need it to

...

tabj says "Bolt-Out damaged bolt and stud remover" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

tabj — Tue, 12 Apr 2011 15:12:39 GMT

Worked well at removing broken stud, but difficult to put on in a tight spot.

...

alljonz says "Worked just as you would hope" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

alljonz — Thu, 26 Aug 2010 16:54:05 GMT

I make my living as a "real" mechanic so I know tools. I had a corroded bolt on a tranny housing that would not budge. I had already broken two 6 point sockets...which had rounded the bolt off when they gave way. The situation got worse with each attempt to break the bolt free. I was about to grind the head off the bolt but decided to give this product a try. I had my doubts...but they were unfounded. It gripped the the 1/2 bolt head and then I applied tons of pressure with the breaker bar....followed by a huge POW and then all the extensions and the bolt remover fell to the ground. I figured I broke the breaker bar or an extension...or the bolt remover socket...just like the previous 10 or so attempts. But to my surprise it was the bolt that had loosened. What a relief. Grinding the top bolt of a transmission housing on a transmission installed in the vehicle would not have been fun. This product is well worth it and should be essential in any mechanics tool box.

...

deskhike says "saved me and my truck an expensive repair" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

deskhike — Tue, 19 Jan 2010 02:08:26 GMT

While removing my spark plugs I managed to round off the hex nut on one of the plugs making it imposible to remove the plug from the head. To make things more difficult the plug sat deep in the head, significantly restricting access by anything other than a deep socket on an extention. This extractor set was perfect for the job, unlike most other extractors, these allow the use of a 3/8 socket wrench and extention bar to permit a deep reach. I had the plug out in no time and saved me the cost of an otherwise expensive repair.

...

tommya05 says "great product" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Mon, 06 Oct 2008 13:45:03 GMT

After spending nearly one month trying to remove a bolt from my transmission housing, I was referred to bolt-out. The bolt in question was very rounded from all the previously failed attempts (I'd tried twice along with two different auto mechanics--one of which was the dealership). Five minutes with the bolt-out and the bolt was out. great product. FYI, had to hammer the bolt-out socket onto the bolt in order for it to bite....

Moki says "The Right Tool For The Right Job!!" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Sat, 28 Jun 2008 23:45:03 GMT

I lost the key for the lug nut locks on my car. Tried different options and none of them worked. With this set in less than 10 sec per nut I was done!!! I did not used an impact gun but gat the job done quick and safe with no damage to the rims. THANKS!!!...

Anonymous says "nuke pump" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Mon, 14 Apr 2008 04:45:02 GMT

Our pump had 8 bolts with rounded off heads. While turning socket with wrench my pal would hit top of socket with short handled maul. We did split the 1st socket and my Lancaster county Sears replaced the set. My work place (nuke plant) wants to buy another set for an up coming job....

Donaldm says "No Warrenty" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Wed, 20 Feb 2008 00:00:21 GMT

Didn't stand up to an Air ratchet. And had no warranty. Be careful ask about the warranty before you buy....

BrianWV says "Low Rate tool NO WARRANTY" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Wed, 02 Jan 2008 07:00:10 GMT

I was given this set as a gift and it is trash. The socket I was using split down the side and blew apart. These are supposed to be impact quality THEY ARE NOT. Had I been using an impact wrench I would have had half the socket imbedded in my skull. I was using a 3/8 breaker bar. I took them back to the store only to find out they are NOT COVERED BY WARRANTY. The employees didn't even know these had no warranty. Had the manager not been at the register they would have traded them out. These are sold in the same section as the other sockets that are warranted. Sears will not replace these DO NOT BY THESE Buy Irwin brand , they have a warranty....

TonHe says "Excellent tool" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Tue, 18 Sep 2007 21:00:07 GMT

I used this impact tool set to remove hardened, rusted nuts off '66 Corvair head studs shipped to me from Wisconsin(even after reading the negative reviews). These tools worked flawlessly, and saved a good set af aluminum cylinder heads from destruction from the grinder or torch. And, they looked like new after removing 12 seized, rusted, rounded over, torqued-on, 41 year old nuts. Highly recommended. Tony H....

JeremyAutomotiveTech says "Dont Buy This !!!No Warrenty!!!" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Sat, 09 Jun 2007 02:00:15 GMT

I used the 13mm bolt remover for the first time and it worked great (Mind you they claim it can be used with an impact gun). Craftsman claims that it has a "Guarenteed Forever" hand tool polocy come to find out that this hand tool does not. I used the 13mm bolt remover the second time and it sheared the sockets insides out like it was butter. I get to the store to find out that it is a non guarenteed item and might i add the guy was very rood about me asking for a warrenty exchange. So I would not buy this item again and I would watch out for the misconseption about "Guarenteed Forever" on hand tools. I dont know about you but i think this is a hand tool....

TimothyA says "Not for impact use!" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Sat, 19 May 2007 16:00:08 GMT

Craftsman claims that this set is impact-grade, yet the second time I used my 13 mm bolt-out it blew in half as soon as hit the trigger on my impact wrench! To add insult to injury I brought it into Sears only to find out it had no warranty. The design does a great job of removing rounded off and rusty fasteners, but the material it is made of is far too brittle and too thin. If you own this set stick to hand tools, but if you don't avoid it and buy the standard bolt-out instead....

richiec says "craftsman bolt out" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Wed, 04 Apr 2007 21:15:31 GMT

I thought that I was buying a good tool but I used bolt out 13mm socket one and it broke like it was made from ceramic--I thought no problem its gaurenteed---sears says no-warrenty and I can't just buy that one to make kit again and sell this junk to someone else. very disappionted and will stop buying craftsman tools!!!!!...

RJMSMETZ says "IMPACT BOLTOUTS" about Craftsman 10 pc. Impact Grade Bolt-Out Damaged Bolt/Nut Remover

sears-feed — Thu, 22 Mar 2007 00:24:06 GMT

MORE LIKE BLOW OUTS... USED THE 14MM/ 9/16 BOLT OUT ONCE WORKED LIKE A CHAMP. THE SECOND TIME IT SPLIT LIKE IT WAS MADE OUT OF PLASTIC. *** NO BIG DEAL ITS A CRAFTSMAN*** WAS I WRONG ****NO WARRENTY***** HAVE TO BUY ENTIRE SET TO REPLACE IT WORTH IT? NO WAY...