http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-reviews Fri, 24 Jul 2009 10:31:23 GMT Latest reviews about Craftsman 4.8 volt Pistol Screwdriver http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-951a0 I used a friend's pistol screwdriver. I liked it so much I bought four for my many toolboxes. The tool has enough power to drive 3 inch wood screws into hardwood. I can't say how many it will drive on one charge, but I was able to drive 10 screws with no problem. It's not fast but it can still be used as a drill. The bits that are included with the tool are good for basic use. Adding a larger bit set brings out the true usefulness of the tool. That clutch feature allows for consistent tightening of screws. This helps prevent stripping out screws. The tool is small enough to get into tight places, but fits well in large hands. To reverse the tool, you only have to move your finger on the rocker switch. The only negative thing I can say is I wish I had purchased these sooner.... Fri, 24 Jul 2009 10:31:23 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-951a0 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-83cf2 Cons: The minimum torque (tightening power) is too high for working on computers--if I were to screw it in using this screwdriver, I may end up stripping the screw thread. Also, the bit is fixed at 1/4" hex. I have a set of screw tips which are 5/32" (5mm) and I have yet to find an adapter. It would be nice if this screwdriver had an adjustable size. Pros: For around the house jobs, this tool is excellent. The torque fits the range needed from assembling shelves to installing doors. Size is pretty small, weighs 25 oz, and easy to use. Comes with a decent variety of bits, probably more than one would need (but does not have every desired bit size, and has 4 redundant flat screw tips). Also comes with drill bits up to 1/8". Overall, it's good around the house, but has a limited variety of bits. Due to the limited selection of bits that fit 1/4" hex, this cannot replace an actual power drill.... Sat, 04 Jul 2009 02:00:06 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-83cf2 sears-feed 4 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-cb43 Bought this tool for small jobs around the house. Built tough. Plenty of power. Simple to use. Very easy to change bits. Excellent beginner power tool.... Thu, 01 Jan 2009 01:30:05 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-cb43 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-2442 This little baby is mine. I purchased this for hanging curtain rods, fixing small things and because of it small size but pretty good power. I saimply stick it in the front of the towel drawer in the kitchen under a couple of towels and always know where it and it's attachments are. It's one of the best tools I have in the kitchen.... Sat, 13 Dec 2008 12:30:02 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-2442 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-409e I have had this cordless screwdriver for 2 years now. We have used it for everything from hanging pictures to wall construction & computer repair & building. It is always right for the job & runs forever on a charge. Over the years I have owned many cordless screw drivers, but with the clutch & proven performance I haven't encountered one better. I plan on buying some for friends & family for gifts.... Tue, 02 Dec 2008 12:30:05 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-409e sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-2f3b This is the second one of these screwdrivers I've purchased (the first has been repaired with new batteries after 3 years of constant use) and as long as Sears continues to provide this model I'll continue to buy it as needed. I am a computer technician/builder and use this driver every day and have come to rely on the power and clutch heavily.... Tue, 26 Aug 2008 02:30:04 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-2f3b sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-2152 I have used several power screwdrivers and this one is by far the best there is for doing light work. The tool is light weight. I do electronic repair work and the variable torque is handy along with the single button for reverse/forward.... Tue, 20 May 2008 16:45:17 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-2152 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-0f740 The tips wobbles really bad making it difficult to hold screw straight. Forget about drilling a hole, the wobbling will not alow you to drill a straight hole.... Wed, 19 Mar 2008 03:45:13 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-0f740 sears-feed 2 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-4e81 Very good product, compact and easy to use. I couldn't believe the number of accessories it came with! It was a great buy for the price.... Sat, 08 Mar 2008 00:15:12 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-4e81 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-aaf5 I have to admit, I'm a very picky shopper. I purchased three different hand tools one from Skil (twice the cost, but feels and performs like a kids toy. Second, from Craftsman 7.2 volt (good features but too bulky and also more expensive ). Both of these tools never actually were used, I just opened the boxes and inspected them. So I returned both of them to the store. Then I bought the 4.8 volt pistol, WOW! it feels solid and comes with a variety of bits. I decided to purchase the extended warr. which just cost a few dollars extra. The tool performs really well. I like the torque adjustment. trust me, with just the 4.8 volts it can over tighten some scews before you know it. It has the right speed for screwing, but not quite fast enough for drilling. I wish it had LED litht. Over all, for the money, this is it! For tight areas and small jobs, when I have this tool in my hand. I say, BRING IT ON!.... Thu, 25 Oct 2007 04:45:04 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-aaf5 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-4b4f I get this one when my 3.6 v dies on battery. I has a better price, more power, the battery last a lot longer, it does not come in a case but its not important because it always in my toolbag . Its ergonomic desing. And very usefull for electrician's task especially when instaling receptacles and switches in a new house or building. Yes i recommended.... Fri, 14 Sep 2007 21:45:05 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-4b4f sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-1cce I have enjoyed this little screwdriver. It is great for small jobs and the price was great. I wished that it had the Speed-Lok system to hold the bits in place. When you reverse the screwdriver the bits have a tendency to slip out. Still a great little screwdriver.... Tue, 26 Jun 2007 04:45:08 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-1cce sears-feed 4 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-5b0f Bought to use above my head working on lighting, it is light, easy to use, and realiable. Holds a charge forever. Has lots of options and accessories. Is compatable with common added parts such as sockets. I would highly reccommend this little driver for anyone who wants a driver that is light and easy to use. And yes if it ever wears out I will get another.... Thu, 17 May 2007 20:45:17 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-5b0f sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-70a1 I am a single lady and don't have much strength in my hands. This little driver is an absolute necessity for building small projects (most recently an oak filing cabinet) or putting up blinds. I compared prices and brands and believe this screwdriver to have the most power and best value for the money.... Sun, 13 May 2007 05:45:11 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-70a1 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-fcee This is a good driver for the money. Good speed. Good torque. Good battery life. Good set of bits. I also have three faults. The most important is that it is not variable speed. There is not partial position of the forward/reverse rocker switch and since the driver is quick, it picks up RPMs fast and isn't terrific for starting screws out or tightening something at risk of stripping. This brings me to my second fault. The clutch isn't reliable. I can't get it to break at any setting so it's not much good at all if you are trying to be careful. The third fault is that it doesn't have an electric brake, so once it gets spinning it takes a while for it to stop. A great tool for the money, but a bit of a loose cannon for precision work.... Tue, 24 Apr 2007 23:15:08 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-fcee sears-feed 3 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-3c5d I have used the 315 10165 pistol screwgun for over a year. It is the best one I've ever had (and I have had ma-a-a-any) and it makes the finest gift for any handyman or housewife. I am an industrial electrician, working in a large sawmill, and the millwrights cannot believe the speed I can produce with this small, tough and versatile tool. I bought 8 to send at Christmas for presents. I do wish I could obtain replacement battery packs for the ones that will no longer recharge. Still, at this price, I can't complain. I really like this tool!!!... Sun, 18 Feb 2007 22:23:39 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-3c5d sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-ca0b I am in the telephone business and when installing new systems, go through as many as 100 one inch wood and sheet metal screws mounting the equipment on walls. We then use them for the more delicate installation of outlets and faceplates. I've charged it and not used it for two weeks, then pull it out and use it all day. Dropped it several times and leave it in the van on freezing nights. I purchased them for each of my employees and gave them to relatives for gifts. Terrific tool. Extremely comfortable. Can't say enough good about it. Worth every penny. Wish there was a place in the handle to hold a couple of bits.... Mon, 05 Feb 2007 06:06:45 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-ca0b sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-35d5 I work in the alarm industry, and this tool has made my job so much easier. From puting in sheetrock anchors, to zipping in the small screws that hold my wireless devices. This is a definate must for any tech. or "do-it-yourselfer". My installs go by much faster, neater, and I don't have to lug a bag full of assorted drivers, not to mention fatigue on the wrists from manual screwdrivers. Do yourself a favor and add this to your tool collection today!... Wed, 03 Jan 2007 20:37:44 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-35d5 sears-feed 5 http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-5c1c0 This pistol screwdriver is an excellent choice. It is light in weight and small in size. The best thing is the higher than usual 330 RPMs (most screwdrivers are 180 RPM), which really speeds things up. The 8 position torque setting is great. The only minus for this screwdriver is it could have a little more torque but I think for most screwdriving applications, this tool fills the bill.... Mon, 25 Sep 2006 15:03:17 GMT http://www.mysears.com/Craftsman-4-8-volt-Pistol-Screwdriver-review-5c1c0 sears-feed 5